You will love these 6 cavity basic silicone soap molds! They are easy to use and Perfect for beginner and advance soap makers. These soap molds works for cold process, melt & pour soap, hot process, and re-batch soap. The glossy finish on the inside of each cavity will give your bars a smooth and professional look.
Please Note that two (2) soap molds are displayed in the image above, only to show the inside and outside of the mold. You will receive one (1) of the molds displayed above.
Mold Cavity Dimensions (in Inches): 3.1” x 2.2” x 0.94” inch
Capacity: 24 oz
Cavity Capacity: 4 oz
Temperature Resistance: -20℉-446℉(-30℃-230℃)
How to use and clean: These molds are easy to use & clean, simply pour your favourite soap recipe in the mold, after completely cool, turn it upside down, apply a little pressure while pulling back the silicone, the soap will pop right out!
Usage Instructions: We recommend filling 3/4 full to make the bars easier to remove. For cold process soap, we recommend 1 tsp. of sodium lactate per pound of oils for easy unmolding.
All products on our website are intended for cosmetic use ONLY.
Information on our website is for educational purposes only. This information is not intended to treat, cure, diagnose or prevent any disease.